Replacing the Oven Heater Baffle
Thermo Scientific
Figure 201. Electronic Module Replacement (2)
10. Reinstall and fix the top cover of the GC.
11. Reinstall the autosampler if present.
12. Plug the cables connected to the external interface of the Electronic Module.
13. If external modules are present, plug the power cable to the AC Input connector of each
external module, and to the wall outlet.
14. Power on the GC.
a. Plug the power cable to the AC Input connector into the back of the GC and to the
wall outlet.
b. Flip up the power switch (breaker) to the position I.
15. Set the normal injector, detector, and GC working conditions.
Removing the oven heater requires replacing the complete oven heater baffle. This includes
the plate, heaters, and temperature sensor.
WARNING This operation must be carried out by authorized and trained Thermo Fisher
Scientific Service Field Engineers.
To replace the oven heater baffle
1. Put the GC in standby condition.
5
GC Main Frame Advanced Maintenance
Replacing the Oven Heater Baffle
TRACE 1600/1610 Hardware Manual
225