Adding The Ptv And Ptvbkf Cryo System - Thermo Scientific TRACE 1600 Hardware Manual

Adding the PTV and PTVBKF Cryo System

Thermo Scientific
17. Set the normal detector, injector, and GC working conditions.
This section provides instructions for installing and configuring the PTV and PTVBKF Cryo
system on your TRACE 1600/1610 using the dedicated kit. See
Figure 561. PTV and PTVBKF Double Cryo System for Carbon Dioxide
Figure 562. PTV and PTVBKF Double Cryo System for Liquid Nitrogen
WARNING This operation must be carried out by authorized and trained Thermo Fisher
Scientific Service Field Engineers.
The cryo system requires the use of liquid nitrogen or carbon dioxide as coolant. Before
using liquid nitrogen or carbon dioxide, read the hazard indications and the instructions
reported in the Safety sheet supplied by the manufacturer with reference to the CAS
number (Chemical Abstract Service). See also
page xxx and "Carbon Dioxide Safety Precautions"
Adding the PTV and PTVBKF Cryo System
Figure 561
"Liquid Nitrogen Safety Precautions"
on page xxxi.
TRACE 1600/1610 Hardware Manual
10
Adding Systems
and Figure 562.
on
547