Thermo Scientific TRACE 1600 Hardware Manual page 248

5
GC Main Frame Advanced Maintenance
Removing/Replacing the GC Back Cover
216 TRACE 1600/1610 Hardware Manual
Figure 189. Back Cover Removal
b. Lift the cover off using the cover handle. Be aware that the ground wire is attached to
the back cover. See
Figure 190. Back Cover
Note Pay attention to the positioning of the ground wire plug, so it can be
reconnected in the same way it was removed.
6. Reconnect the ground wire to the back cover terminal.
7. Replace the cover proceeding in the reverse order in which it was removed.
Figure 190.
Back Cover Fixing Screws
Thermo Scientific