Connecting A Ssl/Ptv Backflush System - Thermo Scientific TRACE 1600 Hardware Manual

8
Installing Optional Kits

Connecting a SSL/PTV Backflush System

Connecting a SSL/PTV Backflush System
382 TRACE 1600/1610 Hardware Manual
This section provides instructions for connecting your SSLBKF/PTVBKF injector modules
with precolumn and analytical capillary column into the oven. Refer to the chapters SSLBKF
Injector Module and PTVBKF Injector Module in the TRACE 1600/1610 User Guide.
This system operates up to 300 °C.
The operation consists of the following operating procedures:
• "To assemble the Tee connector on the mounting bracket"
• "To install the mounting bracket"
• "To connect backflush line, precolumn, and capillary column"
• "To install of a second backflush system"
CAUTION Before starting make sure the SSLBKF/PTVBKF injector module is correctly
installed into its seat.
ATTENTION Avant de commencer, vérifiez que le module d'injecteur SSLBKF / PTVBKF
est bien installé dans son logement.
on
on page 390
on page 396
page 383
on page 392
Thermo Scientific