Installing Optional Kits - Thermo Scientific TRACE 1600 Hardware Manual

Installing Optional Kits

Thermo Scientific
This chapter describes how to install the optional kits available for the TRACE 1600/1610.
See the TRACE 1600/1610 Spare Parts Guide for information about ordering the upgrade kits
in this chapter.
Contents
• Installing the Oven Exhaust Kit
• Installing the Merlin Microseal High Pressure Valve Kit
• Installing the Purge & Trap Adapter Kit on the SSL/SSLBKF Injector
• Installing the Packed Column Adapters
• Installing the HS Adapter Kit on the SSL/SSLBKF Injector
• Installing the Large Volume Splitless Kit
• Installing the Manual On/Off Valve for Single Gas Line
• Connecting a SSL/PTV Backflush System
• Connecting a SSL/PTV Backflush System for High Temperature
• Connecting a GSV Backflush System
• Installing the NoVent Microfluidics
• Installing a FTIR Make-up Module
• Installing the Hot Injection Adapter Kit on the SSL/SSLBKF Injector
• Performing the Dual FPD Detector Configuration
• Installing the Pressure Regulator Kit for Gas Sampling Valve
• Installing the Packed Columns Support Kit
• Installing the ECD Exhaust Vent Kit
TRACE 1600/1610 Hardware Manual
8
345