Installing The Autosampler; Mounting An Autosampler On The Gc - Thermo Scientific TRACE 1600 Hardware Manual

Installing the Autosampler

Mounting an Autosampler on the GC

Thermo Scientific
This section provides instruction for installing and connecting a TriPlus RSH, a TriPlus 100
Liquid Sampler, a TriPlus, an AI/AS 1610, or two AI/AS 1610 in Gemini configuration.
Related Topics
• "Mounting an Autosampler on the GC"
• "Connecting the AI/AS 1610 in Standard Configuration"
To mount the autosampler use the appropriate support and fix it to the installation holes
provided on the top of the GC. See
For further details please refer to the manuals of your sampling system.
Figure 35. Installation Holes and Sampler Supports for TriPlus RSH and TriPlus 100 Liquid Sampler
on page 31
Figure 35 and Figure 36.
TRACE 1600/1610 Hardware Manual
1
Installation
Installing the Autosampler
on page 33
31