Thermo Scientific
To configure handshaking parameters through the touch screen
1. In the main menu select the Configuration icon, the Configuration menu appears.
Figure 42. Configuration Icon
2. In the Configuration menu, select the Handshake icon to open the relevant submenu.
Figure 43. Handshaking Icon
3. Set the Handshaking parameters as listed in
To configure handshaking parameters through the Chromatography Data System
1. Launch the Data System. In the Configuration page specify the handshaking parameters
as listed in
Table
2.
Installing the Autosampler
Table
2, then return to main menu.
TRACE 1600/1610 Hardware Manual
1
Installation
37