Thermo Scientific TRACE 1600 Hardware Manual page 605

Thermo Scientific
f. Repeat step e until all the components are connected to the auxiliary gas interface.
See Figure 598.
Figure 598. Gas Tubes Connection to the Auxiliary Gas Interface - Internal View(
6. Connect the Supply Gas to the Auxiliary Gas Module.
Note Use the 1/8-in. Swagelok fittings provided on the gas inlet ports to connect the
gas lines.
a. Connect the gas line to the corresponding inlet port of interest using the appropriate
nut and ferrules. Use a 7/16-in. wrench for tightening the fittings.
b. Repeat step a until all the gas lines of interest are connected to the corresponding
inlet port on the auxiliary gas module. See
Figure 599. Gas Line Connection to the Auxiliary Gas Interface
10
Adding an Auxiliary Gas System
Figure 599.
TRACE 1600/1610 Hardware Manual
Adding Systems
573