Thermo Scientific TRACE 1600 Hardware Manual page 592

10
Adding Systems
Adding an Auxiliary Gas System
560 TRACE 1600/1610 Hardware Manual
Figure 579. Auxiliary Gas Interface Installed in the Oven
Note If your GC is equipped with the oven for the coupling with a Thermo Scientific
high resolution mass spectrometers (HRMS), the Auxiliary Gas Interface is installed
through the ducts provided on the left and right walls of the oven as well as the GC
equipped with the standard oven. See
for HRMS" on page 565.
The module should be installed into a free external module housing provided on the back of
the GC. See Figure 577.
Auxiliary Gas Interface
installed on Right Wall
"Installing the Auxiliary Gas Interface on the Oven
Left Wall
Right Wall
Thermo Scientific