4
Performing Detectors Routine Maintenance
Maintaining a Flame Photometric Detector (FPD)
206
TRACE 1600/1610 Hardware Manual
10. Reinstall the FPD detector on the base.
a. Place the detector on its base body, ensuring that the Aluminum ring has been
inserted in the correct position, then tighten the fixing nut. See
Figure 181. FPD Detector Reinstallation
b. Reconnect the signal, excitation voltage and ignition/heating cables to the detector.
See
Figure
182.
Figure 182. FPD Cables Connection
Figure
181.
FPD Fixing Nut
Aluminum Ring
Thermo Scientific