Thermo Scientific TRACE 1600 Hardware Manual page 413

Thermo Scientific
7. Remove the nut and the ferrules provided from the valve inlet.
Remove nut and ferrules
8. Connect the gas supply tube previously disconnected (see the step 4). Use a 7/16-in.
wrench for tightening the fittings.
Gas supply tube
9. Turn the carrier gas on.
10. Open or close the flow of the supply gas turning the black handle of the valve up or down
respectively.
11. Set the injectors, detectors, and GC working conditions.
8
Installing Optional Kits
Installing the Manual On/Off Valve for Single Gas Line
TRACE 1600/1610 Hardware Manual 381