Thermo Scientific TRACE 1600 Hardware Manual page 375

Thermo Scientific
11. If other external modules are present, plug the power cable to the AC Input connector of
each module, and to the wall outlet.
12. Power on the GC.
a. Plug the power cable to the AC Input connector into the back of the GC and to the
wall outlet.
b. Flip up the power switch (breaker) to the position I.
13. Set the normal working conditions.TRACE 1600/1610 Hardware Manual
7
Detectors Advanced Maintenance
Replacing the FPD Photomultiplier Tube
TRACE 1600/1610 Hardware Manual 343