Removing/Replacing The Gc Left Side Panel - Thermo Scientific TRACE 1600 Hardware Manual

Removing/Replacing the GC Left Side Panel

Thermo Scientific
b. Lift the top panel up and off the GC.
Figure 184. Top Cover Removal (2)
7. Replace the top cover by completing the steps in the reverse order in which it was
removed.
 To remove the left side panel with the side panel molded of the GC
1. Put the GC in standby condition.
2. Cool the oven, injectors and detectors to room temperature.
Note By pressing the Maintenance button, the GC cool down is automatically
carried out.
3. Power off the GC.
a. Push down the power switch (breaker), located at the back of the instrument, to the
position O.
b. Unplug the power cable from the AC Input connector into the back of the GC and
from the wall outlet.
4. If external modules are present, unplug the power cable from the AC Input connector of
each external module, and from the wall outlet.
5. Remove the panel.
5
GC Main Frame Advanced Maintenance
Removing/Replacing the GC Left Side Panel
TRACE 1600/1610 Hardware Manual 211