Thermo Scientific TRACE 1600 Hardware Manual page 586

10
Adding Systems
Adding the PTV and PTVBKF Cryo System
554 TRACE 1600/1610 Hardware Manual
c. Insert the coolant tube into the insertion hole, and fix it using the screw previously
removed. See Figure
Figure 573. Installation of the Coolant Tubes for Carbon Dioxide and Liquid Nitrogen
d. Guide the coolant tube along the GC top cover up to reach the solenoid valve
assemble on the back of the GC. Bend the tube if necessary.
11. Connect the coolant tube to the solenoid valve assemble.
a. Connect the coolant tube to the solenoid valve assembly using the proper nut and
ferrule. Use a 7/16-in. wrench for tightening the fittings. See
573.
Coolant Tube for Carbon Dioxide
Coolant Tube for Liquid Nitrogen
Figure 574.
Thermo Scientific