Slide-In Module; Removing The Slide-In Module - Thermo Scientific VF-F20-A Operating Manual

7.18 Slide-In Module

7.18.1 Removing the Slide-In Module

Tools required
Preparations
Follow these steps
Integral Fraction Collector FT (VF-F20-A) Operating Manual
CAUTION—Heavy Load, Bulky device
The device is too heavy or bulky for one person alone to handle safely.
To avoid personal injury or damage to the device, observe the following
guidelines:
•
Physical handling of the device, including lifting or moving, requires a
team effort of two persons.
•
A team effort is in particular required when lifting the device into the
system stack or when removing it.
Screwdriver, Torx T20
Prepare the device for transport. See the Transporting or Shipping the
device section in this operating manual.
1. Loosen the four captive screws on the front left and front right of
the device.
Figure 85: Captive screws on the slide-in module
•
7 Maintenance and Service
Page 197