Thermo Scientific TRACE 1600 Hardware Manual page 423

Thermo Scientific
5. Let out the top of the mounting bracket until it is long enough to be secured into two
holes on the bottom of the GC oven.
6. Replace the nut.
7. Tighten the nut until the mounting bracket is securely attached to the top and bottom of
the GC oven.
Figure 368. Mounting Bracket Installed in the GC
Connecting a SSL/PTV Backflush System for High Temperature
Tee Connector
Clamp
TRACE 1600/1610 Hardware Manual
8
Installing Optional Kits
391