10
Adding Systems
Adding the Oven Cryo System
Adding the Oven Cryo System
Oven Cryo System Overview
534
TRACE 1600/1610 Hardware Manual
This section provides instructions for installing and configuring the Oven Cryo system on
your TRACE 1600/1610 using the dedicated kit.
WARNING This operation must be carried out by authorized and trained Thermo Fisher
Scientific Service Field Engineers.
The cryo system requires liquid nitrogen or carbon dioxide as coolant. Before using liquid
nitrogen or carbon dioxide, read the indications of hazards, and the instructions in the
Safety sheet supplied by the manufacturer with reference to the CAS number (Chemical
Abstract Service). See also
Dioxide Safety Precautions"
Two Oven Cryo Upgrade Kits are available:
• Oven Cryo with Liquid Nitrogen (LN
• Oven Cryo with Carbon Dioxide (CO
Each upgrade kit contains all the material required to install the Oven Cryo system on your
GC. See
Figure 543
and
Figure 543. Oven Cryo Kit for Carbon Dioxide
"Liquid Nitrogen Safety Precautions"
on
page
xxxi.
) as coolant.
2
) as coolant.
2
Figure
544.
on
page xxx
and
"Carbon
Thermo Scientific