Thermo Scientific TRACE 1600 Hardware Manual page 598

10
Adding Systems
Adding an Auxiliary Gas System
566 TRACE 1600/1610 Hardware Manual
a. On the left/right exterior wall of the oven box, remove the partial cut plate of the
duct of interest.
b. Remove the pre-shaped plug of insulating material from the duct provided. See
Figure 587.
Figure 587. Left/Right Exterior Oven Wall Box View
Left Oven Wall
IMPORTANT Save the pre-shaped plug of insulating material in a safe place because it
could be reused.
c. On the interior of the oven box, remove the partial cut plate from the corresponding
duct. See Figure 588.
Right Oven Wall
Thermo Scientific