Thermo Scientific TRACE 1600 Hardware Manual page 233

Thermo Scientific
CAUTION If the filter installed is equipped with the spacer (see the kits PN 19050785 and
PN 19050786), first insert the filter, and then the spacer.
Interferential Filter
Spacer
ATTENTION Si le filtre installé est équipé d'un espaceur (voir les kits réf. 19050785 et
réf. 19050786), insérez d'abord le filtre, puis l'espaceur.
b. Reassembly the photomultiplier assembly and the detector body, then fix them
together tightening the knurled nut. See
Figure 173. Photomultiplier Assembly Remounting
10. Reconnect the signal, excitation voltage and ignition/heating cables to the detector.
See Figure 174.
Figure 174. FPD Cables Connection
4
Performing Detectors Routine Maintenance
Maintaining a Flame Photometric Detector (FPD)
Figure 173.
TRACE 1600/1610 Hardware Manual 201