Detectors Advanced Maintenance
Removing/Replacing a Detector Module
Thermo Scientific
This chapter describes TRACE 1600/1610 detector modules that do not require routine
maintenance, but troubleshooting may indicate they need to be cleaned or replaced.
Contents
•
Removing/Replacing a Detector Module
•
Measuring the FID Gas Flows
•
Cleaning or Replacing the FID Jet
•
Measuring the NPD Gas Flows
•
Measuring the FPD Gas Flows
•
Cleaning or Replacing the NPD Jet
•
Cleaning or Replacing the FPD Mirror Metal Plug
•
Cleaning or Replacing the FPD Filter-side Heat Shields
•
Cleaning or Replacing the FPD Flame-side Heat Shields
•
Replacing the FPD Photomultiplier Tube
This section provides the instruction for removing/replacing a front/back detector module.
TRACE 1600/1610 Hardware Manual
7
277