8
Installing Optional Kits
Installing the NoVent Microfluidics
Using the Module
418
TRACE 1600/1610 Hardware Manual
3. Click Ok.
4. Open Chromeleon and select GC Columns in the Instrument Method pane.
Figure 403. GC Columns
5. Choose the FrontColumn or BackColumn tab. Next, select the Post-Column Installed
drop down box and choose On. Enter the post-column length and diameter.
The GC does not recognize the presence of the NoVent microfluidics, so it is invisible to the
system. The module receives only the voltages for supplying the solenoid valve and the
On/Off light from the GC.
The normal condition of the module is Off. If the switch is in the Off position, the Status
LED is off. See
Figure
404.
Figure 404. Module in Off Condition
Status LED Off
Switch on Off Position
Thermo Scientific