Thermo Scientific TRACE 1600 Hardware Manual page 64

1
Installation
Installing the Autosampler
32 TRACE 1600/1610 Hardware Manual
Figure 36. Installation Holes and Sampler Supports for AI/AS 1610 - AI/AS 3000 II Autosampler
Note: The support pin is required when an
AS 1610 must be installed.
Support and Installation Holes for the
AI 1610/AS 1610on the Back Injector
Module.
Support and Installation Holes for the
AI 1610/AS 1610 on the Front Injector
Module.
Support and Installation Holes for Two
AI 1610/AS 1610 in Gemini Configuration.
Support and Installation Holes for One or
Two AI 1610/AS 1610 when a TSQ Quantum
Mass Spectrometer is coupled with the GC.
Support Pin
Support Pin
Support Pin
Thermo Scientific