Thermo Scientific
b. Holding the top of the injector head assembly with your thumb, index, and middle
fingers, turn the assembly clockwise. See
Figure 232. PTV Injector Head Assembly Removal (1)
c. Extract the assembly sideways from its housing. See
Note Do not remove the carrier, split, and purge lines' O-rings on the plate.
Figure 233. PTV Injector Head Assembly Removal (2)
6
Injectors Advanced Maintenance
Cleaning the PTV Injector Head Assembly
Figure
232.
Injector Head Assembly
Figure
233.
TRACE 1600/1610 Hardware Manual
265