Thermo Scientific TRACE 1600 Hardware Manual page 460

8
Installing Optional Kits
Installing the Hot Injection Adapter Kit on the SSL/SSLBKF Injector
428 TRACE 1600/1610 Hardware Manual
Figure 414. SSL Injector Body Removal
SSL/SSLBKF Injector Body Fixing Screws
External Body Head O-ring
Internal Body Head O-ring
SSL Injector Body
Carrier Line O-ring
Purge Line O-ring
Split Line O-ring
a. Using a T20 Torxhead screwdriver, undo the two injector body fixing screws, and
extract the injector body from its housing.
Note Do not remove the carrier, split, and purge lines O-rings.
14. Install the spacer plate. See Figure 415.
Thermo Scientific