Thermo Scientific TRACE 1600 Hardware Manual page 60

1
Installation
Coupling to a Mass Spectrometer
28 TRACE 1600/1610 Hardware Manual
Figure 31. Left/Right Side Panel
Left Side Panel
b. According to the configuration of your high resolution mass spectrometer, on the
left/right exterior wall of the oven box, remove the partial cut plate of the duct of
interest, and then the pre-shaped plug of insulating material from the duct provided.
See Figure 32.
Figure 32. Left/Right Exterior Oven Wall Box View
Left Oven Wall
IMPORTANT Save the pre-shaped plug of insulating material in a safe place because it
could be reused.
c. On the interior of the oven box remove the partial cut plate from the corresponding
duct. See Figure 33.
Right Side Panel
Duct Plate
Right Oven Wall
Thermo Scientific