Thermo Scientific
b.
Holding the top of the injector head assembly with your thumb, index, and middle
=
fingers, turn the assembly clockwise. See
Figure 239. PTV Injector Head Assembly Removal (1)
c. Extract the assembly sideways from its housing. See
Note Do not remove the carrier, split, and purge lines' O-rings on the plate.
Figure 240. PTVBKF Injector Head Assembly Removal (2)
6
Injectors Advanced Maintenance
Cleaning the PTVBKF Injector Head Assembly
Figure
239.
Injector Head Assembly
Figure
240.
TRACE 1600/1610 Hardware Manual
273