Thermo Scientific TRACE 1600 Hardware Manual page 584

10
Adding Systems
Adding the PTV and PTVBKF Cryo System
552 TRACE 1600/1610 Hardware Manual
Figure 569. Aux Temperature/Cryo Module Installed into the GC
9. Install the proper solenoid valve assembly.
The solenoid valve must be installed in the proper seat on the back of the GC.
• In case of a single cryo kit, mount the solenoid assembly as shown in
• In case of double cryo kit, mount the two solenoid valves assembly as shown in
Figure 571.
Figure 570. Single Solenoid Valve Assemble Installation
Cables Holder
Aux Temperature/Cryo Module
Figure 570.
Thermo Scientific