Thermo Scientific TRACE 1600 Hardware Manual page 103

Thermo Scientific
Figure 70. GC Power On
Power Switch Off Position
AC Input Connector
5. If external modules are present, plug the power cable to the AC Input connector of each
module, and to the wall outlet.
6. Flip up the power switch, located on the back side of the GC, to the On (up) position
marked I.
a. TRACE 1600 — When the GC powers on, all the LEDs on the status panel light up
simultaneously, afterward the Power light becomes a solid green while all the other
lights turn off. The GC is now in stand-by status. See
Figure 71. TRACE 1600 Status Panel at the GC Power On
.
b. TRACE 1610 — Check the main menu appears on the touch screen. See
2
Performing Routine Maintenance
Powering On the TRACE 1600/1610
Figure 71.
Power On Status
TRACE 1600/1610 Hardware Manual
Figure 72.
71