Thermo Scientific TRACE 1600 Hardware Manual page 293

Thermo Scientific
a. Unscrew the septum cap of the injector.
b. Using tweezers, remove the septum from the top of the injector head assembly.
8. Remove the liner. See
a. Using the slotted stubby driver provided, unscrew and remove the liner cap.
b. Use tweezers to remove the liner with the liner seal (O-ring) from the injector.
CAUTION Be careful not to break the glass liner when removing it. Glass
splinters might fall into the lower part of the vaporization chamber. If the glass
liner breaks, follow the instructions for
page 133.
ATTENTION Veillez à ne pas briser le liner en verre pendant son extraction. Des
éclats de verre pourraient tomber dans la partie inférieure de la chambre de
vaporisation. En cas de rupture du liner en verre, consultez
liner PTV cassé".
Figure 227.
"Replacing the PTV Broken Liner"
6
Injectors Advanced Maintenance
Cleaning the PTV Injector Head Assembly
"Remplacement d'un
TRACE 1600/1610 Hardware Manual
on
261