Thermo Scientific
Figure 60. Removing the Retaining Nut
5. Use a 1/2 in. offset wrench to remove the column nut. See
CAUTION Save the bottom parts of the injector or detector in a safe place because they
will be reused when you restore the original configuration.
ATTENTION Conservez en lieu sûr les parties inférieures de l'injecteur ou du détecteur
car elles seront réutilisées lors de la restauration de la configuration d'origine.
Figure 61. 1/2 in. Offset Wrench
Figure 62. Removing the Column Nut with an Offset Wrench
Column Connection Nut
Column
Figure
61.
TRACE 1600/1610 Hardware Manual
1
Installation
iConnect Column Lock
61