7
Detectors Advanced Maintenance
Measuring the FID Gas Flows
284
TRACE 1600/1610 Hardware Manual
WARNING The collector insulator must be stored somewhere it can stay clean.
b. Loosen the polarizing electrode fixing screw using a T10 Torxhead screwdriver, and
extract the polarizing electrode from its seat.
c. Place the polarizing electrode on a clean surface.
11. Insert the FID gases measuring tool. See
a. Insert the measuring tool into the detector body.
b. Push the measuring tool downwards until it stops.
Figure 247. FID Gases Measuring Tool
c. Screw the detector cap onto the measuring tool. See
Figure
247.
Male Hose Adapter
Measuring Tool
Figure
248.
Thermo Scientific