Thermo Scientific TRACE 1600 Hardware Manual page 416

8
Installing Optional Kits
Connecting a SSL/PTV Backflush System
384 TRACE 1600/1610 Hardware Manual
Figure 360. Assembling Tee Connector and Mounting Bracket (2)
Clamp Clip
3. Screw the part of threaded shaft of the Tee connector with the smaller diameter into the
Tee connector, then screw the nut on the threaded shaft. Use a 2.5 mm key to tighten the
shaft. See Figure 361.
Figure 361. Assembling Tee Connector and Mounting Bracket (3)
4. Screw the Tee connector into clamp. Turn the threaded shaft until it protrudes the clamp,
then turn the nut until it grip the clamp. See
Figure 362. Assembling Tee Connector and Mounting Bracket (4)
Nut
Threaded Shaft
Tee Connector
Figure 362.
Thermo Scientific