Thermo Scientific TRACE 1600 Hardware Manual page 5

Manufacturer: Thermo Fisher Scientific
Thermo Fisher Scientific is the manufacturer of the instrument described in this manual and, as such, is responsible
for the instrument safety, reliability and performance only if:
• installation
• re-calibration
• changes and repairs
have been carried out by authorized personnel and if:
• the local installation complies with local law regulations
• the instrument is used according to the instructions provided and if its operation is only entrusted to qualified
trained personnel
Thermo Fisher Scientific is not liable for any damages derived from the non-compliance with the aforementioned
recommendations.
Strada Rivoltana, km 4, 20090 Rodano - Milan - Italy — Tel: +39 02 950591 - Fax: +39 02 9505276
Thermo Fisher Scientific performs complete testing and evaluation of its products to ensure full compliance with
applicable domestic and international regulations.
Thermo Fisher Scientific declares, under sole responsibility, that the product as originally delivered complies with
the requirements of the following applicable European Directives and carries the CE marking accordingly:
• Low Voltage Directive:2014/35/EU
• EMC Directive:2014/30/EU
• RoHS Directive 2011/65/EU, including amending Delegate Directive 2015/863/EU
... and conforms with the following product standards:
Safety
This device complies with:
• IEC 61010-1:2010/AMD1:2016, IEC 61010-2-010:2019
• CAN/CSA C22.2 No. 61010-1
• EN 61010-1:2020, EN 61010-2-010:2015
• UL 61010-1
Electromagnetic Compatibility
This device complies with:
• CISPR 11/EN 55011: Group 1 Class A
• IEC 61326-1:2012
• EN 61326-1:2012
• FCC part 15, Subpart B, §15.107(a) and §15.109(a)
Declaration
Thermo Fisher Scientific S.p.A.
Regulatory Compliance