8
Installing Optional Kits
Installing the Hot Injection Adapter Kit on the SSL/SSLBKF Injector
430
TRACE 1600/1610 Hardware Manual
b. If required, replace both the internal and external body head O-rings using tweezers.
16. Install the hot injection adapter on the top of the injector. See
Figure 417. Hot Injection Adapter (1)
Hot Injection Adapter
a. Avoid touching the septum with your fingers. Insert a new septum into the septum
holder cavity of the hot injection adapter using tweezers. See
Figure 418. Hot Injection Adapter (2)
b. Guide the ring nut on the hot injection adapter with the septum, then fix it screwing
the ring nut. See
Figure
337.
Figure
334.
Figure
335.
Thermo Scientific