Thermo Scientific
a. Unscrew the capillary column retaining nut, then remove the analytical column with
its ferrule from the bottom of the injector.
Figure 224. Instant Connect Helium Saver Injector Module: Cleaning the Injector Body (1)
Septum Cap
Ring Nut
Septum Holder/Liner Cap with Septum
Liner Seal
9. Disconnect the helium transfer tube See
a. Loosen the captive screw of the helium transfer tube and remove the tube from the
gas delivery block.
Figure 225. Instant Connect Helium Saver Injector Module: Cleaning the Injector Body (2)
Liner
Figure
225.
6
Injectors Advanced Maintenance
Cleaning the HeS-S/SL Injector Body
Gas Delivery Block
Helium Transfer Tube
TRACE 1600/1610 Hardware Manual
257