11
Upgrading Equipment
Updating HMI Software From USB Stick
596
TRACE 1600/1610 Hardware Manual
Figure 623. USB stick in the USB port below the touch screen
USB Stick
5. On the touch screen main menu, press the Configuration icon to open the
Configuration menu.
6. Press Touch screen to open the relevant menu. See
Figure 624. Touch Screen Main Menu: Configuration
7. Press Update software from USB.
Note It may take a few moments for USB stick to be recognized by the TRACE 1610.
If you do not see the icon Update software from USB in the menu, then return to the
Home screen, and re-enter the Touch screen portion of the Configuration menu.
8. The following page is displays:
Figure
624.
Thermo Scientific