10
Adding Systems
Adding an Auxiliary Gas System
564
TRACE 1600/1610 Hardware Manual
Figure 584. Perform the Duct for the Auxiliary Gas Interface (2)
c. Save the removed insulating material in a safe place because it can be reused.
d. On the left side wall in the interior of the oven, remove the partial cut plate from the
corresponding duct. See
Figure 585. Perform the Duct for the Auxiliary Gas Interface (3)
e. Insert the auxiliary gas interface into the duct. Fix the interface on the exterior wall of
the oven box using the fixing screws provided. See
Figure
585.
Partial Cut Plate
Figure
586.
Thermo Scientific