Thermo Scientific TRACE 1600 Hardware Manual page 529

Thermo Scientific
Figure 497. Support Bracket Installation (1)
Note Two support brackets can be installed for a maximum of four PDD
detectors, two installed on the GC and two installed on the TRACE 1600
Auxiliary Oven. See
Figure 498. Installation of two Support Bracket
10. Place the pulse generator on the support bracket.
a. Place the pulse generator on a convenient position of the support bracket by aligning
the four holes on the base of the generator with the corresponding four rivets on the
support bracket as shown in the example of
Figure 498.
Figure
9
Adding Modules
Adding a PDD Module
499.
TRACE 1600/1610 Hardware Manual 497