8
Installing Optional Kits
Performing the Dual FPD Detector Configuration
440
TRACE 1600/1610 Hardware Manual
Figure 431. Filter Support and Flange Assembly Installation
11. Place the appropriate filter and the photomultiplier tube assembly.
a. Reinsert the filter into the support. The mirror face must be oriented towards the
flame. See
Figure
Figure 432. Filter Remounting
CAUTION Avoid touching the filter with your fingers. If you see fingerprints on the filter,
clean it using GC-grade methanol and air dry before remounting.
ATTENTION Évitez de toucher le filtre avec vos doigts. Si vous voyez des traces de doigts
sur le filtre, nettoyez-le avec du méthanol de qualité GC et séchez-le à l'air avant de le
remonter.
432.
Thermo Scientific