Subaru IMPREZA GD 2007 Series Manual page 3755

asieps_tobira_IM_US.book 14 ページ ２０１２年１月１７日 火曜日 午後３時４８分
Front Fender
EXTERIOR BODY PANELS
3. Front Fender
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Remove the side sill spoilers. <Ref. to EI-37, RE-
MOVAL, Side Sill Spoiler.>(model with side sill
spoiler)
3) Remove the front bumper face. <Ref. to EI-24,
REMOVAL, Front Bumper.>
4) Remove the headlight. <Ref. to LI-15, REMOV-
AL, Headlight Assembly.>
5) Remove the mud guard. <Ref. to EI-33, RE-
MOVAL, Mud Guard.>
6) Remove the bolt, and remove the front fender
panel.
EB-00297
B: INSTALLATION
1) Install in the reverse order of removal.
2) When the front fender panel is installed, the
clearance between front fender panel and front
hood panel must be equal.
Tightening torque:
7.5 N·m (0.76 kgf-m, 5.5 ft-lb)
EB-14