Subaru IMPREZA GD 2007 Series Manual page 3754

asieps_tobira_IM_US.book 13 ページ ２０１２年１月１７日 火曜日 午後３時４８分
2. Front Hood
A: REMOVAL
1) Open the front hood to remove the washer noz-
zles.
2) Release the clips to remove the front hood insu-
lator.
3) Remove the bolts to disconnect the hood from
hinges.
B: INSTALLATION
1) Install in the reverse order of removal.
2) Adjust the clearance between front hood panel
and front fender panel. Clearance must be equal at
both sides.
Tightening torque:
37.0 N·m (3.6 kgf-m, 27.3 ft-lb)
Front Hood
C: ADJUSTMENT
1) Use a hinge mounting holes to align the front
hood longitudinally and laterally.
2) Adjust the height at the front end of hood. <Ref.
to SL-42, ADJUSTMENT, Front Hood Lock Assem-
bly.>
EB-00008
3) Rotate the hood buffer to adjust lateral height.
EB-00009
EB-13
EXTERIOR BODY PANELS
EB-00009
EB-00010