Subaru IMPREZA GD 2007 Series Manual page 3757

asieps_tobira_IM_US.book 16 ページ ２０１２年１月１７日 火曜日 午後３時４８分
Front Door
EXTERIOR BODY PANELS
2) Loosen the screw (A) and tap striker (B) using
plastic hammer to adjust the gap between rear end
surface of front door panel and front end surface of
rear door.
CAUTION:
Do not use an impact wrench. Welding area on
the striker nut plate is easily broken.
(A)
(B)
EB-00017
EB-16