asieps_tobira_IM_US.book 21 ページ 2012年1月17日 火曜日 午後3時48分
8. Trunk Lid
A: REMOVAL
1. TRUNK LID
1) Open the trunk lid.
2) Disconnect the trunk lid connector.
3) Loosen the trunk lid mounting bolts to remove
the trunk lid from hinges.
2. TORSION BAR
1) Open the trunk lid.
2) Using the ST, remove the torsion bar from the
hinge link.
ST 927780000
REMOVER
CAUTION:
During removal and installation, handle the tor-
sion bar carefully, because it will generate reac-
tive force.
ST
3) Remove the torsion bars RH/LH.
CAUTION:
Be careful not to get hit by the trunk lid, be-
cause the trunk lid will slam shut after the tor-
sion bar is removed.
Trunk Lid
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
• Install the trunk lid with uniform clearance.
• Apply grease to the rotating area of hinges and
the torsion bar.
Tightening torque:
Refer to "COMPONENT" of "General Descrip-
tion". <Ref. to EB-10, TRUNK LID PANEL,
COMPONENT, General Description.>
EB-00066
EB-00067
EB-21
EXTERIOR BODY PANELS