Subaru IMPREZA GD 2007 Series Manual page 3760

asieps_tobira_IM_US.book 19 ページ ２０１２年１月１７日 火曜日 午後３時４８分
Rear Door
EXTERIOR BODY PANELS
C: ADJUSTMENT
1) Open the rear door, loosen the body-side bolts
of upper and lower hinges to align the position for
vertical and horizontal direction of rear door panel.
EB-00309
2) Loosen the screw (A) and tap striker (B) using
plastic hammer to adjust the gap between rear end
surface of rear door panel and body surface.
CAUTION:
Do not use an impact wrench. Welding area on
the striker nut plate is easily broken.
(A)
(B)
EB-00017
EB-19