Debug Isis Spf-Triggers - Dell S6000 Reference Manual

Version 6.3.1.0

debug isis spf-triggers

Enable debugging on the events that triggered IS-IS shortest path first (SPF) events for debugging
purposes.
S6000
Syntax
debug isis spf-triggers
To turn off debugging, use the no debug isis spf-triggers command.
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 6.3.1.0
debug isis update-packets
Enable debugging on link state PDUs (LSPs) that a router detects.
S6000
Syntax
debug isis update-packets [interface]
To turn off debugging, use the no debug isis update-packets
[interface] command.
Parameters
interface
Intermediate System to Intermediate System (IS-IS)
Introduced.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced.
(OPTIONAL) Identifies the interface type slot/port as one of
the following:
797