fip-snooping port-mode fcoe-trusted
Configure the port for bridge-to-bridge links.
S4810 and MXL Switch
Syntax
fip-snooping port-mode fcoe-trusted
To remove the bridge-to-bridge link configuration from the port, use the no fip-snooping
port-mode fcoe-trusted command.
Command Modes
INTERFACE
Command History
Version 8.3.12.0
Version 8.3.16.0
Usage
The maximum number of FCoE VLANs supported on the switch is eight.
Information
show fip-snooping config
Display the FIP snooping status and configured FC-MAP values.
S4810 and MXL Switch
Syntax
show fip-snooping config
Command Modes
Command History
Version 8.3.12.0
Version 8.3.16.0
Example
FTOS# show fip-snooping config
FIP Snooping Feature enabled Status: Enabled
FIP Snooping Global enabled Status: Enabled
Global FC-MAP Value: 0X0EFC00
FIP Snooping enabled VLANs
VLAN
----
100
Introduced on the S4810.
Introduced on MXL 10/40GbE Switch IO Module.
•
EXEC
•
EXEC Privilege
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
Enabled
FC-MAP
-------
--------
TRUE
0X0EFC00
629