Show File-Systems - Dell S6100 Configuration Manual

Reload Mode =
Dell#

show file-systems

Display information about the file systems on the system.
Syntax show file-systems
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
E-Series
Example
Dell#show file-systems
Dell#
Command Fields
Field
size(b)
Free(b)
Feature
Type
normal-reload
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series
Introduced on the C-Series
Original command
Size(b) Free(b)
4286574592 4170424320
-
2032525312 590807040
-
-
-
-
Description
Lists the size (in bytes) of the storage location. If the location is remote, no size is listed.
Lists the available size (in bytes) of the storage location. If the location is remote, no size
is listed.
Displays the formatted DOS version of the device.
Displays the type of storage. If the location is remote, the word network is listed.
Feature
FAT32 USERFLASH
- unformatted USERFLASH
Unknown NFSMOUNT
- - network
- - network
- - network
- - network
Type Flags Prefixes
rw flash:
rw fcmfs:
rw nfsmount:
rw ftp:
rw tftp:
rw scp:
rw http:
File Management 73