Ip Dhcp Snooping Vlan - Dell S4810 Reference Manual

Version 7.8.1.0

ip dhcp snooping vlan

Enable DHCP Snooping on one or more VLANs.
S4810
Syntax
[no] ip dhcp snooping vlan name
Parameters
name
Defaults Disabled.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Usage When enabled, the system begins creating entries in the binding table for the
Information specified VLANs.
Related ip dhcp snooping trust
Commands
show ip dhcp snooping
Display the contents of the DHCP binding table.
S4810
Syntax
show ip dhcp snooping binding
Defaults none
Security
Introduced on the C-Series and S-Series.
Enter the name of a VLAN on which to enable DHCP
Snooping.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
NOTE: Learning only happens if there is a trusted port in the VLAN.
— configures an interface as trusted.
1527