Show Running-Config - Dell S6100 Configuration Manual

Version
7.5.1.0
E-Series
Example
Dell#show os-version
RELEASE IMAGE INFORMATION :
-----------------------------------------------------------
Platform
S-Series:S6100-ON
TARGET IMAGE INFORMATION :
-------------------------------------------------
Type
runtime
BOOT IMAGE INFORMATION :
--------------------------------------------------
Type
boot flash
BOOTSEL IMAGE INFORMATION :
-----------------------------------------------------
Type
boot selector
FPGA IMAGE INFORMATION :
--------------------------------------------------------
stack-unit 1
stack-unit 1
stack-unit 1
stack-unit 1
stack-unit 1
stack-unit 1
stack-unit 1
stack-unit 1
Dell#
Usage Information

show running-config

Display the current configuration and display changes from the default values.
Syntax show running-config [entity] [configured] [status] [compressed]
Parameters
entity
Description
Introduced on the C-Series.
Original command.
Version
9.10(0.0) 54246311
Version Target
9.10(0.0) Control Processor
Version Target
3.25.2.2 Control Processor
Version
3.25.0.3
Card
S6100-ON SWITCHCARD CPLD
NOTE: A filepath that contains a dot ( . ) is not
supported.
(OPTIONAL) To display that entity's current (non-default) configuration, enter one of the
following keywords:
NOTE:
prompt returns.
aaa
acl
arp
Size ReleaseTime
Sep 12 2015 04:21:53
checksum
passed
checksum
passed
Target
Control Processor
FPGA Name
S6100-ON IOM CPLD1
S6100-ON IOM CPLD2
S6100-ON IOM CPLD3
S6100-ON IOM CPLD4
S6100-ON MSS FPGA
S6100-ON MSS IAP
S6100-ON OOB-FPGA
If you did not configure anything that entity, nothing displays and the
for the current AAA configuration
for the current ACL configuration
for the current static ARP configuration
checksum
passed
Version
4
18
18
18
18
0.8
1.22
0.7
File Management 75