Upgrade System - Dell S6100 Configuration Manual

upgrade system

Upgrade the Dell Networking OS image. To upgrade the bootflash or bootselector image, use the upgrade boot command.
Syntax upgrade system {flash: | ftp: | nfsmount: | scp: | stack-unit {stack-unit-id |
all} | tftp: | usbflash:} file-url {A: |B:}
Parameters
system
flash: file-url
ftp: file-url
nfsmount://
<mount-point>/
filepath
scp: file-url
stack-unit stack-
unit-id
stack-unit all
tftp: file-url
usbflash: file-url
A: | B:
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0(0.0)
8.3.19.0
Enter the keyword system to upgrade the operating system (OS) image.
Enter the keyword flash: and specify the location of the image file in the format //
directory-path or press Enter to launch a prompt sequence.
Enter the keyword ftp: and specify the location of the image file in the format //
userid:password@host-ip/filepath or press Enter to launch a prompt
sequence.
Enter the keyword nfsmount: and specify the location of the image file in the
format //<mount-point>/filepath.
Enter the keyword scp: and specify the location of the image file in the format
userid:password@host-ip/filepath or press Enter to launch a prompt
sequence.
Enter the keyword stack-unit and specify the stack-unit ID to sync the image to that
stack-unit.
Enter the keyword stack-unit followed by the keyword all to sync the image on all
stack-units.
Enter the keyword tftp: and specify the location of the image file in the format //
host-ip/filepath or press Enter to launch a prompt sequence.
Enter the keyword usbflash: and specify the location of the source file in the
format //directory-path to upgrade form an external flash device or press Enter to
launch a prompt sequence.
Specify the flash partition of the operating-system image to be upgraded.
Description
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Added support for NFS mount.
Introduced on the Z9500.
Added support for IPv6 for the file-url parameter.
Introduced on the S4820T.
File Management 69